The Victron Blue Smart Charger IP67 25A 12V with built-in Bluetooth for workshops, cars, campers, motorcycles and boats provides the battery with the necessary energy, maintains its health and ensures better performance and longer life. This can be used on both AGM and lithium batteries.
The Blue Smart IP67 Charger is the new professional battery charger with built-in Bluetooth. This 25A 12A Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans and can be used on both AGM and lithium batteries.
Victron IP67 25A 12V Charger Features:
Water, dirt and oil resistant
Five stage charge algorithm
Recovery of fully discharged ‘dead’ batteries
Power supply function
Severe cold performance: down to -20°C
LEDs for status indication
Low power mode to charge smaller batteries
Li-ion battery mode
Setup and configure, readout of voltage and current by Bluetooth and APP.
Bluetooth Smart enabled
The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers.
Completely encapsulated: waterproof, shockproof and ignition protected
Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminum and the electronics are molded in resin.
High Efficiency
Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.
Adaptive 5-stage charge algorithm
bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor-controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: Less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode, float voltage is reduced to 2.2V/cell (13.2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to equalize the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Also charges Li-ion (LiFePO₄) batteries
LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm.
Protected against overheating
Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail.
Two LEDs for status indication
Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off)
Green LED: power on
Specifications
Brand: Victron Energy
Shipping Details
Weight: 6 lbs
Dimensions: 4 × 3 × 9 in
Downloads
Shipping Policy
Warehouse Pickup:
You have the option of selecting warehouse pickup for most of our products. To facilitate this process, please ensure that your order is paid in full online prior to pickup. If you’re interested in in-store pickup at our partner warehouses across the United States, please feel free to reach out to us. Pickup hours are Monday to Friday from 7 AM to 3 PM PST. An email confirmation will be dispatched to you once your order is ready for pickup.
Shipping Services:
The majority of items will be shipped using USPS and UPS services.
We offer a variety of shipping options. On occasion, a third-party supplier may oversee our inventory and handle the shipping of your products. Northwest SCADA and its Partners retain the right to select the courier for shipping, regardless of the choice made at checkout. It’s important to note that Northwest SCADA cannot guarantee specific courier shipping time frames, and any delays occurring after the product has left our or our partners’ warehouse are beyond our control.
Free Shipping:
As of now, Northwest SCADA does not provide free shipping within the United States.
Single Solar Module Shipping Policy:
To acquire Solar Modules from Northwest SCADA, a minimum order of 4 modules is mandatory. By placing an order for fewer than 4 modules, you automatically agree to the terms of single module shipping. It is crucial to comprehend that Northwest SCADA does not assume liability for damages that may transpire during shipping, and the company does not supply replacement modules in such instances. Your cooperation with and adherence to this policy are sincerely appreciated.
Order Delay Scenario:
Kindly note that Northwest SCADA cannot assure specific courier shipping time frames and bears no responsibility for any delays in shipping after the product has left either our warehouse or that of our partners.
Questions Regarding Returns:
For inquiries related to returns, we encourage you to review our Return Policy at northwestscada.com/return-policy.
Queries and Contact:
Should you have any queries about our shipping policy, please do not hesitate to get in touch with us:
Phone: 1-877-352-5396 Email: logistics@northwestscada.com
Return and Exchange Policy
General Policy
Our products are sold with the understanding that all sales are final. We do not offer returns or exchanges once a purchase is made. Please review your order carefully before making a purchase to ensure it meets your needs.
Exceptions
- Defective or Damaged Products: If you receive a product that is defective or damaged upon arrival, please contact us immediately to discuss potential refund or exchange options.
- Order Cancellation: Orders that have not yet been shipped may be eligible for cancellation. Please contact us directly for assistance.
Special Considerations
- Solar Panels, Generators, and Other Specific Items: Sales of solar panels, generators, solar module racking, open box items, special orders, orders over $10,000, and oversized items are final. These items cannot be returned or exchanged.
- Large Orders: Orders exceeding $10,000 are subject to our final sale policy, with no returns or exchanges permitted.
Additional Information
- Contact Information: For any questions or concerns regarding our policy, or to inquire about a defective or damaged product, please reach out to us at:
- Phone: 1-877-352-5396
- Email: sales@northwestscada.com
Summary
Please ensure your purchase decision is final, as we are unable to accommodate returns or exchanges. Our team is available to answer any questions you may have prior to your purchase to help ensure your satisfaction.
Warranty
All products are backed by the manufactures warranty first. You will find details regarding manufacture warranties below.
| Products & Accessories: | Warranty Period |
|---|---|
| KestrelMet Weather Stations | Two (2) years |
| Rainwise Weather Stations | Two (2) years |
| Victron Energy Products | Five(5) years |
| Canbat – Lithium Batteries | Ten (10) Years |
| Pylontech – Lithium Batteries | Ten (10) Years |
Any items not covered by the manufacture warranty above is covered by Northwest SCADA’s Limited 1 Year Warranty.
We want our customers to be confident in the products they purchase from us, which is why we offer a 1 year warranty on all of our products that are not covered by manufacture specified warranties below. In the event that something goes wrong, the buyer will only need to pay for return shipping.
Products that are damaged outside of the manufactures listed warranty specifications will not be covered under the warranty.
Solar Panel Warranty
All solar panels are backed by the solar panel manufactures warranty.
QUESTIONS
If you have any questions concerning our warranty policy, please contact us at:
1-877-352-5396
warranty@northwestscada.com