The Victron Blue Smart IP67 12V Charger with built-in Bluetooth for workshops, cars, campers, motorcycles and boats provides the battery with the necessary energy, maintains its health and ensures better performance and longer life. This can be used on both AGM and lithium batteries. Order directly from Northwest SCADA with free fast shipping anywhere in Canada.
Victron Energy – Blue Smart 12V 7A-25A IP67 Battery Charger
Item will ship from our warehouse within 1-5 business days unless otherwise stated alerting to extended processing times
Out of Stock
Item is currently out of stock in our warehouse. Contact us for further details on availability.
Available on Backorder
Item is out of stock and on backorder. Processing times will very on backorder products. Contact us for further details on availability.
Item availability is limited. Contact us for further details on availability.
Northwest Scada reserves the right to DropShip order based on customer location and product availability.
Northwest SCADA utilized multiple warehouses across Canada and the United States. Some products will ship from the United States to Canada and from Canada to the United States based off product availably and/or warehouse location. Some products are not kept in our Canadian or American warehouses meaning cross border shipping will take place.
Contact us at anytime if you have any questions about the products and availability.
The Blue Smart IP67 Charger is the new professional battery charger with built-in Bluetooth. This 7A-12A Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans and can be used on both AGM and lithium batteries.
Victron IP67 12V Charger Features:
- Water, dirt and oil resistant
- Five stage charge algorithm
- Recovery of fully discharged ‘dead’ batteries
- Power supply function
- Severe cold performance: down to -20°C
- LEDs for status indication
- Low power mode to charge smaller batteries
- Li-ion battery mode
- Setup and configure, readout of voltage and current by Bluetooth and APP.
Bluetooth Smart enabled
The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers.
Completely encapsulated: waterproof, shockproof and ignition protected
Water, oil or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminum and the electronics are moulded in resin.
Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat. And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better than the industry standard.
Adaptive 5-stage charge algorithm
bulk – absorption – recondition – float – storage
The Blue Smart Charger features a microprocessor-controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: Less maintenance and ageing when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage mode, float voltage is reduced to 2.2V/cell (13.2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to equalize the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
Also charges Li-ion (LiFePO₄) batteries
LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm.
Protected against overheating
Can be used in a hot environment such as a machine room. Output current will reduce as temperature increases up to 60°C, but the charger will not fail.
Two LEDs for status indication
Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off)
Green LED: power on
Warranty: Northwest Scada backs the products we sell with a 3 year warranty covers manufacturer defects, Buyer pays return shipping, Products damaged outside of listed specifications will be excluded.
Returns: Northwest Scada accepts returns within 30 days, 20% restocking fee may apply, buyer pays return shipping. Follow the link below to begin a return request.
Visit our Warranty and Returns page for more details